RESEARCH CATALOG
BPC-157
BPC-157 is listed in the Peptide Tactics catalog and available to order for research use in India, supplied as a 10 mg lyophilized vial. It is also written as BPC 157 or BPC157, and appears in older literature under the code PL 14736. Listed pricing, the sequence and molecular data on public record, analytical considerations for a 15-residue peptide, and what documentation can be requested are all set out below.
BPC-157 is a synthetic pentadecapeptide — a chain of fifteen amino acids — corresponding to a partial sequence of the gastric peptide referred to in the literature as body protection compound. It is listed here as a research catalog item with the compound reference data recorded in public chemical databases.
Enquiries are completed over WhatsApp or email. Peptide Tactics provides information and distribution for qualified research use. See the research-use policy before ordering.
Also written as
BPC 157 · BPC157 · PL 14736 · pentadecapeptide BPC 157
Compound identity
| Amino acid sequence | GEPPPGKPADDAGLV(PubChem CID 9941957) |
|---|---|
| Length | 15 residues (pentadecapeptide)(PubChem CID 9941957) |
| Molecular formula | C62H98N16O22(PubChem CID 9941957) |
| Molecular weight | 1419.5 g/mol(PubChem CID 9941957) |
| CAS registry number | 137525-51-0(PubChem CID 9941957) |
| PubChem CID | 9941957(PubChem) |
| Catalog format | 10 mg • lyophilized powder(catalog information) |
Each row above is attributed to its source. Rows citing a database record are reference information about the molecule; rows marked catalog information describe this listing. Neither is a specification, an analytical result or a claim about any particular batch.
Research classification
Synthetic peptide. Recorded in DrugBank as an investigational compound; it is not an approved medicine in India or elsewhere.
Chemical characteristics
- The sequence is proline-rich, with three consecutive proline residues near the N-terminus, which is relevant when interpreting chromatographic behaviour and fragmentation patterns.
- It contains no cysteine residues, so no disulfide bridge needs to be accounted for during analysis.
- Two aspartate and one glutamate residue give the molecule acidic character that influences its behaviour across a pH gradient.
Analytical methods
- Reversed-phase HPLC (RP-HPLC) is the method most commonly used to express the chromatographic purity of a synthetic peptide as a percentage of total peak area at a stated wavelength.
- Mass spectrometry (typically ESI-MS or MALDI-TOF) is used to confirm that the observed mass of the material is consistent with the expected mass of the intended sequence.
- Because purity figures are method-dependent, an analytical result is only interpretable alongside the method conditions and the batch it describes.
Both methods are covered in more detail in our guides to HPLC analysis of peptides and mass spectrometry for identity confirmation.
Stability and storage considerations
- Lyophilized peptides are generally supplied as a dry solid because the removal of water slows hydrolytic degradation pathways.
- Cold, dry, light-protected storage is the general handling expectation for lyophilized research peptides.
- Once a peptide is taken into solution, its stability profile changes and is influenced by solvent, pH, temperature and the number of freeze-thaw cycles.
- Storage and handling expectations for a specific batch should be taken from that batch's documentation rather than from general guidance.
See peptide stability and degradation for the chemistry behind these considerations.
What this page does not claim
- BPC-157 is not an approved medicine. Public records describe it as investigational, and no approved indication, dosage form or route exists.
- Peptide Tactics does not publish batch analytical data on this page. Documentation availability should be confirmed before ordering.
Independent Analytical Documentation
Janoshik Analytical verification
Catalog products are independently verified through Janoshik Analytical. Certificates of analysis from that laboratory are issued per product and per batch — not as a single generic document for the whole catalog — so the report you receive describes the material you are ordering.
Should you require a Janoshik COA for BPC 157, write to us on WhatsApp and we will provide the applicable report for that product.
We do not currently publish a full independent analytical report on this page for the BPC 157 listed here. That does not mean documentation is unavailable — it means the report is supplied on request for the batch being fulfilled, rather than attached permanently to a catalog listing that outlives any one batch.
If a report is a requirement for your work, ask before ordering. We will check what Janoshik or other documentation covers the current batch and tell you what it is. Where nothing exists for that batch, we will say so.
Reading the documentation matters as much as having it. Our guides on how to read a peptide certificate of analysis and what a purity figure does and does not mean cover what to look for, and our documentation page explains the request process.
Ordering BPC 157 in India
BPC 157 is ordered through the catalog and finalised over WhatsApp or email, so that any question about specification or documentation is settled before the order is placed rather than after it.
Immediate dispatch whenever couriers are operating. Orders from Bangalore are dispatched immediately whenever courier operations are open. Orders from elsewhere in India are dispatched as soon as couriers are operating.
Distribution is within India. Material is supplied for in-vitro research and analytical applications only, and we do not supply for human or veterinary use.
Frequently asked questions
- Can I buy BPC-157 in India from Peptide Tactics?
- Yes. BPC-157 is listed in our catalog as a 10 mg lyophilized vial with the price shown on this page, and it is available to order for research use within India. Orders and enquiries are handled over WhatsApp or email, and the material is supplied for in-vitro research and analytical applications only.
- What documentation can I request for BPC-157?
- You can request whatever documentation exists for the batch being supplied, and we will tell you what that is before you order. Depending on the batch that may be a supplier certificate of analysis or an independent laboratory report. We do not hold a published independent analytical report for the BPC-157 currently listed and do not claim one. Where documentation does not exist, we say so rather than implying it does.
- How quickly are BPC-157 orders dispatched?
- Dispatch is immediate whenever courier services are operating. Bangalore orders take priority in the dispatch queue; orders from elsewhere in India go out as soon as couriers are running, and anything received outside courier hours is dispatched when they reopen. We do not quote a delivery date, because transit time is the courier's and not ours.
- Can you source a peptide that is not listed?
- Yes. Our catalog is what we currently hold, not the limit of what we can look into. Send the compound name, quantity and any specification that matters — salt form, purity threshold, documentation requirement — and we will investigate sourcing options and tell you what is possible, what it would cost and what documentation exists.
- Is BPC-157 intended for human use?
- No. Everything in this catalog is supplied for in-vitro research and analytical applications only, and not for human or veterinary use. We do not provide dosing, administration guidance or any therapeutic recommendation, and we cannot supply material for those purposes.
- What is BPC-157?
- BPC-157 is a synthetic peptide of fifteen amino acids (sequence GEPPPGKPADDAGLV) corresponding to a partial sequence of a peptide identified in gastric juice. In this catalog it is listed strictly as a research material.
- What is the molecular weight of BPC-157?
- Public chemical database records give a molecular formula of C62H98N16O22 and a molecular weight of 1419.5 g/mol for the free-base peptide. Material supplied as a salt will have a different measured mass per vial.
- Is BPC-157 an approved medicine in India?
- No. BPC-157 is not an approved medicine. It appears in public records as an investigational compound, and this catalog presents it only for in-vitro research and analytical applications.
- What format is BPC-157 supplied in?
- The catalog entry is a 10 mg vial of lyophilized powder. Lyophilized presentation is standard for research peptides because the dry solid is more stable in transit and storage than a solution.
Sources
Can't Find the Compound You Need?
Our catalog lists what we currently hold, and it is not the full range of research materials we can look into. If you need a compound that is not listed, tell us what you are looking for and we will investigate sourcing options for it.
Useful things to include in your enquiry:
- The compound name, and any code or CAS number you have for it.
- Quantity per vial, and how many vials.
- Any specification that matters to your work — salt form, purity threshold, or the analytical method you need it reported against.
- Whether batch documentation or an independent analytical report is a requirement, so we can establish up front whether it is available.
We will tell you what we can source, what it would cost and what documentation exists. Where we cannot source something, or cannot establish its documentation, we will say so rather than take the order.
Sourcing enquiries are accepted for in-vitro research and analytical use only. We cannot supply material for human or veterinary use, and we do not advise on how any compound should be used.
Related compounds
TB-500
Buy TB-500 in India from Peptide Tactics. 10 mg research vial with listed pricing, the Ac-LKKTETQ-OH reference data and an honest account of the name's ambiguity.
View compound pageMOTS-c
Buy MOTS-C in India from Peptide Tactics. 10 mg research vial with listed pricing, 16-residue sequence, molecular data and oxidation notes. Research use only.
View compound pageFurther reading
- What are peptides? — A peptide is a chain of amino acids joined by amide bonds.
- Peptide purity explained — A purity percentage on its own carries less information than it appears to.
- Lyophilized peptides explained — Almost every research peptide arrives as a lyophilized solid.